FEATURES:
1. GLM-750 IS A FULLY AUTOMATIC SHRINK PACKAGING MACHINE INCLUDING SIDE SEALER AND SHRINK TUNNEL WHICH CAN FEED PRODUCTS, SEAL AND CUT FILM AND SHRINK FILM BAG AUTOMATICALLY. IT IS WIDELY USED IN FOOD, PHARMACEUTICAL, STATIONARY, TOY, AUTO PARTS, COSMETICS, PRINTING, HARDWARE, ELECTRICAL APPLIANCES AND OTHER INDUSTRY.
2. THIS MACHINE CAN PACK LONG PRODUCTS. THERE IS NO LIMIT OF PRODUCT LENGTH BECAUSE OF SIDE SEALING SYSTEM.
3. SPECIAL DURABLE ALLOYED SEALING KNIFE WITH ANTI-STICK TEFLON COATS MAKES SEALING STRONG AND HAS BETTER PERFORMANCE OF HEAT CONDUCTION.
4. SIDE SEALING LINE CAN BE ADJUSTED IN THE CENTER OF PRODUCT OR OTHER DESIRED POSITION.
5. FILM PERFORATING WHEELS CAN BE ADJUSTED OR REMOVED EASILY.
6. ONLY ADJUST PACKING WIDTH AND HEIGHT BY HAND WHEELS WITHOUT CHANGING ANY MOLDS AND PARTS WHEN PACKING SIZE CHANGES. PACKING LENGTH CAN BE DETECTED BY THE SENSOR AUTOMATICALLY.
7. OPERATE EASILY AND CONVENIENTLY BY MOVEABLE CONTROL PANEL.
8. ADOPT SIEMENS PLC AND COLORFUL TOUCH SCREEN, OMRON TEMPERATURE CONTROLLER, TIMER, RELAY, SWITCH, AND SENSOR.
9. A PAIR OF PHOTOELECTRIC SWITCH IN VERTICAL FOR THIN PRODUCTS.
10. OPTIONAL SENSOR FOR TRANSPARENT PRODUCTS.
| SPECIFICATION: |
| SEALING TYPE |
SIDE SEALING |
| POWER SUPPLY |
380V/50-60HZ/3PHASE |
| PRODUCT LENGTH |
INFINITE |
| SEALING HEIGHT |
220MM |
| SEALING WIDTH |
500MM |
| PRODUCT SIZE |
WIDTH + HEIGHT < 600MM |
| PACKING CAPACITY |
DEPENDS ON PRODUCT LENGTH |
| FILM TYPE |
CENTER FOLDED POLYOLEFIN (POF) FILM OR POLYETHYLENE (PE) FILM |
| MAX FILM SIZE |
700MM (WIDTH) X 280MM (OUTER DIAMETER) |
| POWER CONSUMPTION |
MAX. 10.5 KW |
| TUNNEL OVEN SIZE |
DEPENDS ON PRODUCT LENGTH |
| TUNNEL CONVEYOR SPEED |
VARIABLE, 40 M/MIN |
| TUNNEL CONVEYOR |
CHAINS WITH ROTATING SILICON COATED RODS |
| WORKING HEIGHT |
780-820 MM |
| AIR PRESSURE |
0.5MPA (5 BAR) |
| SEALING KNIFE |
SPECIAL DURABLE ALLOYED SEALING KNIFE WITH ANTI-STICK COATS |
| OPERATION PANEL |
COLORFUL TOUCH SCREEN, OMRON TEMPERATURE CONTROLLER |
| MACHINE MATERIAL |
CARBON STEEL |
| MACHINE DIMENSIONS |
1610 X 1450 X 1680 MM, 1800 X 900 X 1460 MM |
| LAYOUT: |
|
MACHINE LINE WORKING STEP:
- The conveyor 1 is the belt conveyor with pusher structure. This conveyor can connect with customer other machines line for feeding the paper roll automatically. The pusher will push the paper roll one by one into the conveyor 2.
- The conveyor 2 is the belt conveyor with a roll fall down structure, the paper roll will go and down into the conveyor 3.
- Next is the paper label machine without glue, this machine connect with the conveyor 3, label paper will be paging one by one, and the paper roll will down from the conveyor 2, label paper will put on the bottom of the paper rolls.
- Then is the RG-400 automatic heat shrink packing machine, in this machine will seal and shrink 1 paper roll.
- In the end of the machine RG-400 will connect with a turning conveyor, this conveyor will do the function of the transfer. The paper roll will down to stand position to the turning conveyor.
- After the turning conveyor is a deviding structure with conveyor, in here the paper roll will be devided into two lines for feeding.
- Next is the machine RG-730 automatic heat shrink packing machine, in this machine will seal and shrink the 6 rolls.
- After the machine RG-730 is an output conveyor, this conveyor will be better for collect.
Audited Supplier 
){kind=link}
){kind=link}